User's Manual

Using the Control Panel
3.8
PCL Menu
This menu sets the PCL emulation configuration. You can set
the font type, symbol type, lines per page, and point size.
(*: the default setting)
RS-232C
This item is available only if the optional serial
interface card is installed in your printer. For
details, see page 9.3.
• BAUD Rate : Lets you select the rate at
which data is being sent to or from your
computer using the serial communication.
•
Robust XON : Turns use of XON/OFF of
serial communication control on or off.
When this item is set to
On , the printer
sends a continuous stream of XONs to the
computer to indicate that the serial port is
ready to receive more data.
Maintenance
This item allows you to maintain the toner
cartridge.
•
OPC Cleaning : Cleans the OPC drum of
the cartridge and produces a cleaning sheet
with toner debris on it.
•
Fuser Cleaning : Cleans the fuser unit
inside of the printer and produces a cleaning
sheet with toner debris on it.
•
Remain Toner : This item allows you to
check how much toner are left in the
cartridge.
Item Explanation
Typeface
You can select the standard font to be used in PCL
emulation.
•PCL1~PCL7’s interval between letters is fixed,
and PCL8~PCL45’s interval is proportional to
the font type and point size. You can adjust the
font size of PCL1~PCL7 using the
Pitch item,
and PCL8~PCL45 can do using Point Size
item.
• PCL46~PCL54’s interval and point size are
fixed.
Symbol
This item selects the symbol to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when
printing letters.
Item Explanation
Values: PCL1* ~ PCL68
Values: ROMAN8 ~ PCCYRILLIC *PC8
Lines
This item allows you to set vertical spacing from 5
to 128 lines for the default paper size. The lines
may differ according to the paper size and
printing orientation.
Pitch
When you select one between PCL1 and PCL7
from the
Typeface menu, you can determine the
font size by setting the number of characters that
will print in one horizontal inch of type. The
default value, 10 is the best size.
Point Size
When you select one between PCL8 and PCL45
from the
Typeface menu, you can determine the
font size by setting the height of the characters in
the font.
Courier
This item lets you select the version of Courier
font to use.
Item Explanation
Values: 5 ~ 128 *60 (Letter), 64 (A4)
Values: 0.44 ~ 99.99 (0.01 unit) *10
Values: 4.00 ~ 999.75 (0.25 unit) *12
Values: Regular*, Dark