User's Manual
Table Of Contents
- CONTENTS
- Introduction
- Setting Up Your Printer
- Using the Control Panel
- Using Print Materials
- Basic Printing
- Maintaining Your Printer
- Solving Problems
- Using Your Printer on a Network
- Installing Printer Options
- Specifications
- INDEX
Using Print Materials
4.6
2
Pull the extender to extend the output tray to its full-
length position to hold longer paper.
3
If you do not want to stack the printed pages on the rear
output tray, slide the extender to its place and close the
tray. The pages will stack on the top output tray.
N
OTE
: The rear output tray can hold up to 100 sheets of
paper. If the tray is overloaded with printed pages, it may fall
from the printer. Remove the pages so that the tray is not
overloaded.
Printing on Special Print
Materials
Printing on Envelopes
Guidelines
• Only use envelopes recommended for laser printers. Before
loading envelopes in the Multi-purpose Tray, make sure that
they are undamaged and are not stuck together.
• Load envelopes into the Multi-purpose Tray only.
• Do not feed stamped envelopes.
• Never use envelopes with clasps, snaps, windows, coated
lining, or self-stick adhesives. These envelopes may severely
damage the printer.
1
Open the Multi-purpose Tray and pull the extender.
2
Open the rear output tray and pull the extender.
3
Flex or fan the edge of the envelope stack to separate
them before loading.
4
Load the envelopes into the Multi-purpose Tray
with the
flap side down
. The stamp area is
on the left side
and
the end of the envelope
with the stamp area enters the
printer first
.