User's Manual
Table Of Contents
- INTRODUCTION
- Purpose
- Document Content and Organization
- Conventions
- Revision History
- CHAPTER 1. Samsung LTE System Overview
- CHAPTER 2. System Overview
- CHAPTER 3. System Structure
- CHAPTER 4. Message Flow
- CHAPTER 5. Supplementary Functions and Tools
Ver.
CHAPTER 2. System Overview
2600-00FKQFGA2
1.0
CHAPTER 2. System Overview
2.1 Introduction to System
Indoor Pico Cell, an LTE eNB, is located between the UE and the EPC. It provides mobile
communications services to subscribers according to the LTE air interface standard.
The Indoor Pico Cell transmits/receives radio signals to/from the UE and processes the
modulation and demodulation of packet traffic signals. The Indoor Pico Cell is also
responsible for packet scheduling and radio bandwidth allocation and performs handover
via interface with the EPC.
The Indoor Pico Cell can be installed vertically or horizontally; and it can be installed on
the wall, pole or rack by using the installation brackets. The Indoor Pico Cell is an all-in-
one unit. If a fault occurs, the unit must be replaced with new one.
© SAMSUNG Electronics Co., Ltd.
page 14 of 72