User's Manual

Ver.
CHAPTER 3. System Structure
2600-00FKQFGA2
1.0
The external interface of the Indoor Pico Cell is as follows:
Figure 11. External Interface of Indoor Pico Cell
Name
Connector Type Description
ANT0, ANT1
SMA
RF Antenna
GPS SMA GPS Antenna
1PPS
SMA
1 PPS Reference Clock
10M
SMA
Reference Frequency
B/H
RJ-45
Copper Backhaul (10 Base-T/100 Base-TX/1000 Base-T)
LMT
RJ-45
LMT connection or Daisy-chain connection port
PWR
Molex 4P
12 VDC power input
The Indoor Pico Cell shows the system operation status through the LED (STS). The table
below describes the LED status.
LED Status Description
Red on - Hardware is reset.
- An error occurred with the power.
- Critical alarm is generated.
- Backhaul link is down.
Orange on
Booting has been completed.
Orange blinking (slow)
ROM loader is running.
Orange blinking (fast)
The software download and status are being checked.
Green on
Software is running.
Green blinking
Normal operation
Red blinking
Major/Minor alarm is generated.
LED off No power supply
GPS
1 PPS
10M
STS
RESET
B/H LMT
PWR
ANT 0
ANT 1
© SAMSUNG Electronics Co., Ltd.
page 34 of 72