User's Manual

Ver.
CHAPTER 3. System Structure
2600-00FKQFGA2
1.0
Simple Network Management Protocol (SNMP)
The SNMP is an SNMP agent for supporting a standard SNMP. It performs interfacing with
the upper management systems and interoperates with the internal subagents. When
receiving a request for a standard MIB object from the LSM, the SNMP processes the
request independently. When receiving a request for a private MIB object, it transmits the
request to the corresponding internal subagent.
The main functions are as follows:
 Interface with SNMP Manager
Soft Ware Management (SwM)
The SwM downloads and runs the package for each board in accordance with the file list
downloaded during the preloading procedure. The SwM monitors the software that has
been run, provides information on the running software, and supports software restart and
upgrade according to the command.
The main functions are as follows:
 Downloading and installing software and data files
 Reset of hardware unit and system
 Status monitoring of the software unit in operation
 Managing and updating the software and firmware information
 Software upgrade
 Inventory Management Functions
Test Management (TM)
The TM checks the internal and external connection paths of system or the validity of its
resources. The connection paths are classified into system internal IPC path and external
path to other NEs. Moreover, the TM conducts on-demand tests upon the operator’s request
and periodic tests according to the schedule set by the operator.
The main functions are as follows:
 Enable/disable the Orthogonal Channel Noise Simulator (OCNS)
 Setting/clearing a Model
 Ping test
 Measuring the Tx/Rx power
 Measuring the antenna Voltage Standing Wave Ratio (VSWR)
© SAMSUNG Electronics Co., Ltd.
page 44 of 72