ML-1670 Series ML-1675 Series Mono Laser Printer User’s Guide imagine the possibilities Thank you for purchasing a Samsung product.
copyright © 2011 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • • • • • • • • Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. PCL and PCL 6 are trademarks of Hewlett-Packard Company.
safety information These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place for future reference.
If the machine gets overheated, it releases smoke, makes strange noises, or generates an odd odor, immediately turn off the power switch and unplug the machine. ► This could result in electric shock or fire. Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. ► This could result in electric shock or fire. If the plug does not easily enter the electrical outlet, do not attempt to force it in.
INSTALLATION / MOVING Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution Before moving the machine, turn the power off and disconnect all cords. Then lift the machine: • If the machine weighs under 20 kg (44.09lbs), lift with 1 person. • If the machine weighs 20 kg (44.09lbs) - 40kg (88.18lbslbs), lift with 2 people. • If the machine weighs more than 40 kg (88.18lbs), lift with 4 or more people.
When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine. ► You could get injured. Keep the power cable and the contact surface of the plug clean from dust or water. ► Otherwise, this could result in electric shock or fire. Do not disassemble, repair or rebuild the machine by yourself. ► It can damage the machine. Call a certified technician when the machine needs repair.
regulatory information This machine is designed for a normal work environment and certified with several regulatory statements. Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1. Class I laser products are not considered to be hazardous.
Power Save This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http://www.energystar.gov. Recycling Recycle or dispose of the packaging material for this product in an environmentally responsible manner.
• This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. Important warning: You must earth this machine.
China only Regulatory information_ 11
about this user’s guide This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each step during actual usage. It is a valuable resource for both novice and professional users for the proper installation and use of the machine. • • • • • Read the safety information before using the machine. If you have a problem using the machine, refer to the troubleshooting chapter. (See "Troubleshooting" on page 48.
Finding more information You can find information about setting up and using your machine in the following resources, either as a print-out or on screen. Material name Description Quick Installation Guide This guide provides information on setting up your machine. This guide is provided in the box with the printer. User’s Guide This guide provides you with step-by-step instructions for using your machine’s full features, maintaining your machine, troubleshooting, and replacing supplies.
features of your new product Your new machine is equipped with a number of special features that improve the quality of the documents you print. Special Features Print with excellent quality and speed • • You can print with a resolution of up to 1,200 x 1200 dpi effective output. Your machine prints A4-sized paper at up to 16 ppm and letter-sized paper at up to 17 ppm.
Features by Models The machine is designed to support all of your document needs from printing to more advanced networking solutions for your business. Features by models include: FEATURES ML-1670 Series ML-1675 Series High Speed USB 2.
introduction 1. This chapter gives you an overview of your machine: This chapter includes: • • Machine overview Control panel overview • Understanding the status LED Machine overview Front view This illustration may differ from your machine depending on its model.
Rear view This illustration may differ from your machine depending on its model.
Control panel overview This control panel may differ from your machine depending on the model. 1 Jam Shows the status of paper jams in your machine (See "Understanding the status LED" on page 19). 2 Online/Error Shows the status of your machine (See "Understanding the status LED" on page 19). Print Screen Prints the displayed screen of your monitor. (See "(Print screen) button" on page 19.) Power You can turn the power on and off with this button. (See "(Power) button" on page 19.
Understanding the status LED a. Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even when red LED is on and the printer stops printing. The color of the LEDs indicates the machine's current status.
Function Description Power On/Off Press this button to turn the power on or off. Cancel print job During printing, press this button once. The print job is cleared from both the machine and the computer and then the machine returns to the ready mode. This may take some time depending on the size of the print job. If you press this button for more than 2 seconds, the power goes off. Turning on the machine 1. Plug in the power cord. 2. Press on the control panel.
getting started 2. This chapter gives you step-by-step instructions for setting up the USB connected machine and software. This chapter includes: • • • • • • Setting up the hardware Printing a configuration sheet Supplied software System requirements Installing USB connected machine’s driver Sharing your machine locally Setting up the hardware This machine will not operate when the power main fails. This section shows the steps to set up the hardware, as is explained in the Quick Install Guide.
System requirements Requirements (recommended) OPERATING SYSTEM Before you begin, ensure that your system meets the following requirements: Windows Mac OS X 10.5 Your machine supports the following Windows operating systems. CPU • • Requirement (recommended) OPERATING SYSTEM CPU free HDD space RAM Windows® 2000 Intel® Pentium® II 400 MHz (Pentium III 933 MHz) 64 MB (128 MB) 600 MB Windows® XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.
Windows 2008 Server R2, click Run Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control windows. 3. Select Install now. If necessary, select a language from the drop-down list. The Advanced Installation has an option, Custom Installation. The Custom Installation allows you to select the machine’s connection and choose individual component to install. Follow the instruction on the window. 4.
d) After uninstalling the printer driver, reinstall it (see “Installing USB connected machine’s driver” on page 23). g) The Samsung Installer window opens. Click Continue. h) Select Uninstall and click Uninstall. i) When the message which warns that all applications will close on your computer appears, Click Continue. j) When the uninstall is done, click Quit.
[root@localhost uninstall]#./uninstall.sh d) Click Uninstall. e) Click Next. f) Click Finish. If Printer properties item has a ► mark, you can select other printer drivers connected with the selected printer. Installing the SmartPanel 1. Make sure that the machine is connected to your computer and powered on. 2. When the Administrator Login window appears, type in root in the Login field and enter the system password. You must log in as a super user (root) to install the machine software.
basic setup 3. After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values. This chapter gives you step-by-step instructions for setting up the machine. This chapter includes: • Setting the default tray and paper Setting the default tray and paper Linux You can select the tray and paper you would like to keep using for printing job. From your computer Windows 1. Click the Windows Start menu. 2.
