User's Manual

Display Control
21
Display Control
20
*** SETUP MENU ***
E Dimmer (1) G
FM Xmit. Freq. (90.7) J
Bright (32) J
Color (32) J
Sharpness (32) J
Tint (32) J
Record speed (SP) J
Auto Repeat (off) J
Display Reset J
m n ENTER MENU
Dimmer
You can adjust the brightness of the display to 1 to 4 depending on the ambient illumination.
FM Xmit. Freq.
It changes FM frequencies received by your car stereo.
[Note 1]
Bright
It adjusts the brightness of the screen.
Color
It adjusts the color of the screen.
Sharpness
It adjusts the sharpness of the screen.
Tint
It adjusts the tint of the screen.
Record Speed
It adjusts recording speed for your VCR.
Auto Repeat
It turns on/off the automatic repeat function of your VCR.
Display Reset
It resets the screen to default values.
[Note 1]
Tuning in to FM stations
You can enjoy FM broadcasts via your car stereo. As this monitor does not have built-in
speakers, you should use your FM tuner. Frequency range : 90.7MHz to 92.5MHz
To set FM frequencies
1. Select the menu screen.
2. Select FM Xmit. Freq. and press the ENTER key.
3. Use the m or n key to select one within the frequency range.
4. Tune your car FM radio (or FM receiver ) to the selected station.
A different FM station may be received during a long distance drive. In this case, follow
the steps above to retune it to the desired station.