User's Manual

Chapter 2 Installing System
RFD01P Series Installation Manual v1.0 xxi
Copyright © 2017, All Rights Reserved.
To fix Unit Bracket (Side Installation)
1 Make sure that you have the following items:
Table 5. Parts and Tools for fixing Unit Bracket (Side Installation)
Category
Description
Parts
Unit bracket
1 EA
Fasteners
M6 × 20L Hex. Bolt (washer assembly)
4 EA/RRU
Recommended Torque Value
M6 × 20L Hex. Bolt
43 lbfin(50 kgf·cm)
Working Tools
Screw Driver('+', No. 2), Torque Wrench (10~50 lbfin), Torque Wrench
Spanner head (apply Hex. Head: 10 mm), Spanner (10 mm)
2 Loosen a fastener of the finger guard left side and separate the dummy cover
from the system.
Figure 13. Fixing Unit Bracket_Side Installation (1)
Dummy Cover
M3 Screw
[Left View]