User's Manual

Chapter 2 Installing System
RFD01P Series Installation Manual v1.0 xxiii
Copyright © 2017, All Rights Reserved.
Assembling 3Sector Mounting Bracket Assembly_Front
Assemble the 3sector mounting bracket assembly_front before installing 3sector
system. The method for assembling the pole type is identical to it of wall type.
To assemble 3Sector Mounting Bracket Assembly_Front
1 Make sure that you have the following items:
Table 6. Parts and Tools for assembling 3Sector Mounting Bracket Assembly_Front
Category
Description
Parts
Mounting Bracket_Front
1 EA
Extension Mounting Bracket
2 EA
Fastener
M10 × 25L Hex. Bolt(washer assembly)
2 EA
Recommended Torque Value
M10 Hex. Bolt
217 lbf·in(250 kgf·cm)
Working Tools
Torque Wrench (100~400 lbf·in), Torque Wrench Spanner head (apply Hex.
Head: 17 mm), Spanner (17 mm)
2 Hang the right hook of mounting bracket_front on the Extension mounting
bracket hook groove.
Figure 15. Assembling 3Sector Mounting Bracket Assembly_Front (1)
Mounting Bracket_Front
Hook
Extension Mounting Bracket
Hook Groove
[3Sector Mounting Bracket Assembly_Front]