User's Manual

Chapter 2 Installing System
RFD01P Series Installation Manual v1.0 xxv
Copyright © 2017, All Rights Reserved.
Fixing Pole Type
Assembling Mounting Bracket
For 1 Sector
The way to assemble 3sector mounting bracket is as follows:
To assemble Mounting Bracket_1Sector Pole Type
1 Make sure you have the following items:
Table 7. Parts and Tools for assembling Mounting Bracket_1Sector Pole Type
Category
Description
Parts
Mounting Bracket_Front
1 EA
Mounting Bracket_Rear
1 EA
Fasteners
M10 × 220L Carriage Bolt
M10 Plain Washer
M10 Spring Washer
M10 Hex. Nut
2 EA
2 EA
2 EA
2 EA
Working Tools
Spanner (17 mm)
When fixing the mounting bracket, the specification of pole is from 50A (2.38 in. /
60.5 mm) to 100A (4.5 in. / 114.3 mm) and the specification of carriage bolt is
M10 x 220L.
When fixing pole, fix it using the outside hole of mounting bracket_front.
Outside hole
Inside hole