User's Manual
Chapter 2 Installing System
RFD01P Series Installation Manual v1.0 xxxiii
Copyright © 2017, All Rights Reserved.
3 Locate the carriage bolt in the side open hole of the mounting bracket_rear and
fix the fastening materials on both sides.
Figure 25. Fixing Mounting Bracket Assembly_1Sector Pole Type (2)
4 Check the level of mounting bracket assembly on a pole and adjust the level.
Figure 26. Leveling Mounting Bracket Assembly_ 1Sector Pole Type
When fixing the pole mounting bracket assembly on a pole, be sure to check the
level of bracket. After finishing the installation, you can adjust the level minutely.
When occurring poor leveling, adjust the position of fasteners used to fix the
Mounting bracket assembly or its leveling status.
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
[1Sector Side & Standard Mounting Bracket Assembly]
Mounting Bracket_Rear
Side Hole
M10 Carriage Bolt