User's Manual

Chapter 2 Installing System

RFD01P Series Installation Manual v1.0 xxxv

3 Locate the carriage bolt in the side open hole of the mounting bracket_rear and

fix the fastening materials on both sides.

Figure 28. Fixing Mounting Bracket Assembly_3Sector Pole Type (2)

4 Check the level of mounting bracket assembly on a pole and adjust the level.

Figure 29. Leveling Mounting Bracket Assembly_ 3Sector Pole Type

When fixing the pole mounting bracket assembly on a pole, be sure to check the

level of bracket. After finishing the installation, you can adjust the level minutely.

When occurring poor leveling, adjust the position of fasteners used to fix the

Mounting bracket assembly or its leveling status.

Fixing RRU

For 1 Sector

The method for installing the 1sector RRU is sorted into standard installation and

[3Sector Side Mounting Bracket Assembly]

If it is level, the bubble of the

spirit level is positioned at the

center of both lines.

Side Hole

M10 Carriage Bolt

Mounting Bracket_Rear