User's Manual
Chapter 2 Installing System
RFD01P Series Installation Manual v1.0 xliii
Copyright © 2017, All Rights Reserved.
3 Place a mounting bracket on the fixing location, Check the level status using a
level and adjust the level of bracket assembly.
4 If the level status is normal, mark the anchor bolt holes on a wall.
Figure 36. Marking_Wall Type
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
[3Sector Side Installation Mounting Bracket Assembly]
[1Sector Side & Standard Mounting Bracket Assembly]
5.11 (130)
[3Sector Standard Installation Mounting Bracket Assembly]
≥ 16.14 (410)
≥ 16.14 (410)
Unit: in. (mm) / : Marking Point