User's Manual

Chapter 2 Installing System
RFD01P Series Installation Manual v1.0 xliv
Copyright © 2017, All Rights Reserved.
To drill anchor holes and fix anchors
1 Make sure you have the following items:
Table 15. Parts and Tools for Drilling & Anchoring
Category
Description
Parts
M10 Strong Anchor
2 EA
Woking Tools
Hammer Drill, Concrete Drill Bit [0.55 in. (14 mm)], Vacuum Cleaner, Hammer,
Anchor Punch (For M10 Strong Anchor)
Table 16. Anchor Bolt Drill Bits and Hole Depth
Category
Anchor Bolt
Drill Bits
Hole Depth
RRU (Wall Type)
M10
0.55 in. (14 mm)
1.73 in. (44 mm)
2 Drill anchor holes at marked points with removing dust from the holes using a
cleaner. Fix strong anchor to the drilled hole.
Figure 37. Drilling & Anchoring
Hammer Drill
Vacuum Cleaner
0.55 in.
(14 mm)
M10 Strong Anchor
Anchor Punch
Hammer
[O]
* Remove the debris from the drilled hole.
[Anchor Hole Cross Section]
1.73 in.
(44 mm)
[X]
0.55 in.
(14 mm)