User's Manual

Chapter 3 Connecting Cables
RFD01P Series Installation Manual v1.0 lxv
Copyright © 2017, All Rights Reserved.
Connecting Power Cable
To connect Power cable
1 Make sure you have the following items:
Table 27. Parts and Tools for connecting Power Cable
Category
Description
Installation
Section
Rectifier ~ RRU Power Input Port
Cable
AWG 8 or AWG 10 × 2C
(The color of the core wire can be changed according to the specification of the cable used.)
Connector
Rectifier
Check specifications of rectifier output terminal per site and prepare fasteners.
RRU
JONHON, Push Pull Type, CT48J-1502TSCBM-07 to open
Working Tools
Cable Cutter, Wire Stripper, Compressor, Heating Gun, Nipper
Table 28. Power Cable/Connector Pin Map
Power Connector
Pin No.
Description
Color
Pin 1
-48 V DC
The color of the core wire can be changed according to the
specification of the cable used.
Pin 2
RTN
[Cable side Connector]
[System side Connector]
Bump
Groove
Bump
Groove
Pin 1
Pin 2
Pin 1
Pin 2