User's Manual
Chapter 3 Connecting Cables
RFD01P Series Installation Manual v1.0 lxxxii
Copyright © 2017, All Rights Reserved.
Connecting RET Cable
To connect RET cable
1 Make sure you have the following items:
Table 33. Parts for connecting RET Cable
Category
Description
Installation Section
RF Antenna ~ RRU RET port
Cable
RET Cable Assembly
Connector
RF Antenna
Check the RF antenna (RETu) RET connector specification
per site
RRU
AISG 2.0
Table 34. RET Cable Pin Map
Pin No
Description
Cable Color
1
N/C (Not Connected)
-
2
N/C (Not Connected)
-
3
RS485 B
White
4
GND
Blue
5
RS485 A
Brown
6
+24 V DC
Red
7
DC Return
Black
8
N/C (Not Connected)
-
Before fitting the RET connector, make sure to align the female connector’s hole
with the male connector’s pin first.
2 Install an RET cable from the RF Antenna to the RRU RET port.
[Male Connector]
[Female Connector]
Hole
Pin
[Male: RRU Side]
[Female: Antenna Side]