User's Manual

Confidential
Chapter 4 Message Flow
LTE eNB System Description v2.0 53
Copyright © 2017, All Rights Reserved.
protocol internally.
The following figure shows the Web-EMT interface:
Figure 29. Web-EMT Interface
Through Web-EMT, the operator can reset or restart eNB or its internal boards,
view and change the configuration and operation parameter values, monitor the
system status and faults, carry out diagnostic functions, and so on. But the resource
grow and degrow functions and changing the operation information related to
neighbor list are available from LSM only, which manages the entire networks and
the loading images.
CLI
The CLI is the method used for operation or maintenance of eNB. The operator
can perform the text-based operation and maintenance via CLI after login to eNB
via telnet in PC.
The functions of the CLI are as follows:
Loading
The CLI can reset or restart board of eNB.
Configuration Management
The CLI provides the function that executes Man-to-Machine Command (MMC)
that allows viewing and changing the configuration information for eNB.
Status Management
The CLI provides the function that manages status for the processors and various
devices of eNB.