User's Manual

ManualsBrandsSamsung Electronics ManualsElectronicsBluetooth Smart Controller

Using the Smart Contol

Smart Control at a Glance

Turn on/off the TV.

Adjust the Volume.

Change channel.

Returns to the previous menu.

Lets you access the Voice Control function. When you press the button, the TV

Display the command list. You can speak using the microphone embedded in

your remote. For more detailed information about the Voice Control function,

see the “Recognition” in the e-manual or see user manual.

To exit the Voice Control function, press the button again or press any other

button.

Go to ‘Home’.

If user doesn’t press any button or touch the pad during 10 seconds, the Smart Control will be set to Sleep mode

automatically. To wake up the Smart control, Press or touch the Touch Pad.

FUNCTION Fn Show you the virtual remote

Change input source

GUIDE Show you the Channel List

+ / -

∧ / ∨

RETURN

VOICE

Side Key Mute

Left

Turn on/off the Settopbox.Right

SOURCE

Summary of content (10 pages)

PAGE 1
Using the Smart Contol Smart Control at a Glance Left Turn on/off the TV. Right Turn on/off the Settopbox. +/- Adjust the Volume. ∧/∨ Change channel. RETURN Returns to the previous menu. VOICE Lets you access the Voice Control function. When you press the button, the TV Display the command list. You can speak using the microphone embedded in your remote. For more detailed information about the Voice Control function, see the “Recognition” in the e-manual or see user manual.
PAGE 2
Using the Smart Contol Initial Pairing When you turn on the TV for the first time, you should connect your Smart control with your TV. 1. Press the button on your remote. 2. Press any button in your remote or press the pairing button on the back of your remote. 3. Wait until the connection is complete. If you want to perform the pairing process again, press the pairing button on the back of your remote . The Smart Control will be initialized.
PAGE 3
Using the Smart Contol Using the Touch Pad ● Move the Highlight. Slide your finger from one side to the opposite direction. To move the Highlight continuously, slide your finger from one side to the opposite direction, and then hold your finger on the corresponding direction’s edge. ● Move the Control Panel of TV. ● Select an item. Press the Touch Pad. ● ● ● ● Open Open Open Open the the the the History Screen. Tools menu. colors and play control function screen. shortcut functions screen.
PAGE 4
Using the Smart Contol To Enter a channel number through Smart Control 1. During watching broadcast, press the NUMBER button on your remote. The TV displays number button screen. 2. Enter a channel number you want using your remote. When you enter a channel number, the TV displays an Auto Complete list to start with a corresponding channel number. If you change a channel by entering the channel number, the corresponding channel number is memorized in the list automatically.
PAGE 5
Using the Smart Contol Using the Smart control with IR Blaster When you connect IR Blaster with your TV, you can control connected external devices with your TV using the Smart Control. IR Blaster Paring 1. After inserting the batteries, turn on the IR Blaster. Follow diagram in battery compartment. 2. Move the IR Blaster to the direction of your TV’s IR receiver, and then press the PAIRING button on the bottom of the IR Blaster. 3. The TV will connect your IR Blaster and Smart Control automatically.
PAGE 6
Using the Smart Contol Setting up Universal Remote Control Lets you control the Set-Top-Box(STB) or the BD player or both connected to the TV using your Smart control. After you connect the device to the TV, the Smart Control can control the navigation, number, and other keys needed to operate and control the device. To connect the external device with your Smart control, follow these steps: 1. Press the CONTEXT button at the top right corner of the Touch pad. The shortcut functions list appears. 2.
PAGE 7
14. The message Do you have IR Blaster? appears. If you have IR Blaster, select YES. If you don't have IR Blaster, select NO. 15. Press the Touch Pad to select DOWNLOAD. Universal remote setup date will be downloaded to your IR Blaster. Your external device has been setup successfully. Your IR Blaster must be powered on and connected to TV. For more detailed information about how to connect IR Blaster with TV, see "IR Blaster Pairing". 16. A pop-up message Do you want to exit the widget? appears.
PAGE 8
PAGE 9
PAGE 10