User Manual

26 27
Pairing the Smart Touch Control
To control the TV with the Smart Touch Control, you need to connect the Smart Touch Control and the
TV via Bluetooth. Connect the Smart Touch Control to the TV.
"
The Smart Touch Control can only connect to a single TV.
1.
Point the Smart Touch Control at the remote control sensor of the TV and press the TV button to
turn the TV on.
"
The remote control receiver’s location may vary depending on the model.
2.
A Bluetooth icon will appear on the screen as shown below. The TV will then attempt to connect
to the Smart Touch Control unit automatically.
<The attempting to connect and completion icons>
Reconnecting the Smart Touch Control
If the Smart Touch Control stops operating or works abnormally, replace the batteries. If the problem
persists, press the PAIRING button on the Smart Touch Control to re-pair with the TV. The PAIRING
button cannot be accessed without removing the Smart Touch Control’s battery cover. Point the Smart
Touch Control at the TV’s remote control sensor from between 30 cm and 4 m and press the PAIRING
button. The pairing image appears on the screen and the Smart Touch Control is connected to the TV.
<The Smart Touch Control unit's PAIRING button>