User's Manual

2-2
Chapter 2
AceLink ADSL Modem Setup
Before Installation
This chapter examines what the user must know before installation.
Before installation of your ADSL modem follow the directions described in this chapter.
Safety Check
Before proceeding with the installation of the AceLink ADSL modem, user must check
the following categories.
Electricity Safety check
y The user should not remove or open the product’s cover, it is especially dangerous
when the power is on.
y Check and make sure if there are any flammable, electric conducting objects around
the modem. Make sure that there are no wet objects around. And check if the cable is
not worn out and other electrical devices around the modem are properly grounded.
Location check
y Electrical products tend to generate heat during operation. It is possible that if the
environment does not provide enough ventilation it would result in improper function
of the modem. Make sure that the modem is exposed to circulating air.
y Check if the power is properly provided. If it happens to cause sparks or noise, be sure
to install a voltage regulator.