User's Manual

Pause Dialing from a Stored Phonebook Entry
1. Dial the number from the Phonebook.
2. Wait for the appropriate prompt from the system
you are calling. When prompted, press to
send the DTMF number that follows your hard
pause.
3. “SENDING DTMF” flashes on the display and the
transmitted tone sounds.
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
call, such as a bank’s teleservice phone number.
2. Press to enter a hard pause. The phone
displays a “p” meaning a hard pause.
3. Enter the number to be sent after the pause and
then press to dial the first number.
4. After connecting, press again at the prompt to
transmit the additional number.
32
CCaallll FFuunnccttiioonnss
33
CCaallll FFuunnccttiioonnss
Adjusting the Volume
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone.
Press to increase and to decrease the volume.
The illustration on the display shows all eight levels
(the more bars, the louder).
In Standby mode, you can adjust the key tone volume
by using these keys.