User's Manual

Settings 131
Advanced Wi-Fi settings
1. From the Settings screen, touch Wi-Fi ➔ Advanced .
2. Configure settings:
• Network notification : When enabled, your phone notifies you
of nearby Wi-Fi networks when you launch a high data-usage
application.
• Keep Wi-Fi on during sleep : Specify when to switch from
Wi-Fi to mobile data for data communications, when the phone
goes to sleep (when the backlight goes out). This setting can
affect your data usage, and the behavior of devices you
connect to your phone, such as when tethering or using Mobile
Hotspot.
•MAC address : (Not configurable) View your phone’s MAC
address, needed for connecting to some secured networks
(only shows when Wi-Fi is active).
•IP address : (Not configurable) View your phone’s IP address
(only shows when connected to a Wi-Fi network).
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other over a
direct Wi-Fi connection, without a network or Wi-Fi hotspot.
For example, some printers support Wi-Fi Direct, and you
could print from your phone using Wi-Fi Direct.
Turning Wi-Fi Direct On or Off
1. From the Settings screen, touch Wi-Fi ➔ Wi-Fi Direct .
Note: If you have the Wi-Fi client option or the Portable Wi-Fi
Hotspot
turned on, a prompt pops-up asking you to
verify that you want to disable either of these options
and turn
Wi-Fi Direct on. To turn Wi-Fi Direct on, touch
OK .
The
Wi-Fi Direct screen appears, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices .
DRAFT
FOR INTERNAL USE ONLY