User's Manual

Connections 93
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
over a Wi-Fi connection, without separate connections to a
network or Wi-Fi hotspot. For example, some printers
support Wi-Fi Direct, and you can print from your phone
using Wi-Fi Direct.
Configuring Wi-Fi Direct
For information on configuring Wi-Fi Direct, see “Configuring
Wi-Fi Direct” on page 132.
Turning Wi-Fi Direct On or Off
1. From the Home screen, touch Menu ➔ Settings .
2. Under
Wireless and network , touch More settings .
3. Touch
Wi-Fi Direct to turn Wi-Fi Direct On, or
touch
Wi-Fi Direct to turn Wi-Fi Direct Off.
The
Wi-Fi Direct screen appears, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices .
AllShare Cast
AllShare Cast lets your phone share the contents of its
display with other Digital Living Network Alliance (DLNA)
certified devices, such as Smart televisions.
Note: To view more information about DLNA certified products
visit http://www.dlna.org/home .
1. Connect your phone and another DLNA certified device
to the same Wi-Fi network. (For more information, refer
to “Wi-Fi” on page 83.)
2. On your phone press
Home , then touch
Menu ➔ Settings . The Settings screen appears.
3. Under
Wireless and network , touch More settings . The
Wireless and networks screen appears.
4. Touch
AllShare Cast . The AllShare Cast screen appears
with
AllShare Cast already active and begins scanning
for available devices. All detected DLNA certified
devices are listed under
Available devices .
5. Touch the desired device to establish a connection. You
can now view the contents of your phone’s display on
the connected device.
OFF
ON
DRAFT
FOR INTERNAL USE ONLY