User's Manual

150
Note: You must enable at least Pattern security before setting
up a VPN. If you have not yet enabled security, you’ll be
prompted to do so the first time you launch VPN
settings.
NFC
Use NFC (Near Field Communication) to share information
between your phone and another NFC device by touching the
devices together, typically back-to-back.
For more information about sharing information with NFC, “S
Beam” on page 150.
 From the Connections screen, under Connect and share :
• Touch the NFC slider to turn NFC On.
• Touch the NFC slider to turn NFC Off.
Note: NFC must be turned on to use S Beam.
S Beam
S Beam uses your phone’s NFC (Near Field Communication)
to send, or “beam”, content to other NFC and Wi-Fi Direct
devices, by holding the devices close together.
S Beam works in the background. To share pictures or videos
from Gallery, videos from Video player, or songs from Music
player. Just bring the devices together (typically back-to-
back), then touch the screen.
Turning S Beam On or Off
 From the Connections screen, under Connect and share :
• Touch the NFC slider to turn NFC On.
• Touch the NFC slider to turn NFC Off.
3. Under Connect and share :
• Touch the S Beam slider to turn S Beam On.
• Touch the S Beam slider to turn S Beam Off.
Note: NFC must be turned on to use S Beam.
DRAFT
FOR INTERNAL USE ONLY