User's Manual

70
Call alerts
Set options for sounds and vibrations to occur during calls.
 From the Call Settings screen, touch Call alerts . The
following options are available:
• Call vibrations : Enable Vibrate on connection to network to
have your phone vibrate when it connects to the network.
Enable on
Call-end vibration to have the phone vibrate when
the other caller ends the call.
•Call status tones : Choose options for sounds to play during
calls. Enable
Call connect tone to have the phone play a tone
when the other caller answers a call. Enable
Minute minder to
have a tone play once per minute during a call. Enable
Call end
tone
to have the phone play a tone when the other caller ends
the call. Touch
OK to save the settings.
• Alerts during calls : Enable to have notifications for alarms and
new messages play during phone calls. When disabled, these
notifications will be muted during a call.
Accessory setting for call
Configure headset options for calls.
 From the Call Settings screen, touch Accessory settings
for call
. The following options are available:
• Headset settings for incoming calls :
– Automatic answering : When enabled, and you have a
headset connected to the Headset Jack, incoming calls are
answered automatically after a delay, set at Automatic
answering timer.
– Automatic answering timer : Choose a time period to delay
before automatically answering an incoming call when
Automatic answering is enabled and a headset is connected to
the phone.
• BT (Bluetooth) headset settings for outgoing calls :
– Outgoing call conditions : When the phone is paired with a
Bluetooth headset, you can choose to make calls even when the
phone is locked.
DRAFT
FOR INTERNAL USE ONLY