User's Manual

DRAFT
Internal Use Only
198
To pair your device with another Bluetooth device:
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, tap the
Visibility field (shown
by the device name).
Your device must be visible to successfully pair with an
external device. This is shown by a blue check mark.
3. Tap
SEARCH FOR DEVICES . Your device displays a list of
discovered in-range Bluetooth devices.
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code, if needed, and tap
OK .
6. The external device must accept the connection and enter your
device’s PIN code.
Once successfully paired to an external device,
displays
in the Status area.
Note: Due to different specifications and features of other Bluetooth-
compatible devices, display and operations may be different,
and functions such as transfer or exchange may not be possible
with all Bluetooth-compatible devices.
Disconnecting a Paired Bluetooth Device
Disconnecting a paired device breaks the connection between the
device and your phone, but retains the knowledge of the pairing. At a
later point when you wish to reconnect the device, there is no need
to setup the connection information again.
1. Verify your Bluetooth is active.