User's Manual

DRAFT
Internal Use Only
Connections 205
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
Displays when Wi-Fi is configured for a Wi-Fi Direct
connection to another compatible device in the same
direct communication mode.
Manually Add a New Network Connection
1. From the Wi-Fi network screen, tap ADD NETWORK .
2. Enter the Network SSID (the name of your Wireless Access
Point).
3. Tap the
Security field and select a security option. This must
match the current security setting on your target WAP.
4. Enter your WAP’s password if the WAP is secure.
5. Tap
Save to store the new information and connect to the target
WAP.
Note: Once you connect to a target Wi-Fi, you will not need to re-enter
your Wireless Access Point password (WAP key) again, just
reconnect. The WAP key is required again only if your device is
reset using factory default settings.