User's Manual

Network setup_ 37
4.network setup
This chapter gives you step-by-step instructions for setting up the network connected machine and software.
This chapter includes:
• Network environment
• Introducing useful network programs
• Using a wired network
• IPv6 Configuration
Supported optional devices and features may differ according to your
model. Please check your model name.
(See "Features by Models" on page 25.)
NETWORK ENVIRONMENT
• Ethernet 10/100 Base-TX
• Win
dows 2000/XP/2003/2008/Vista
• Vari
ous Linux OS
• Ma
c OS X 10.3 ~ 10.6
• TCP/IPv
4
• DHCP, BOO
TP
• DNS, WI
NS, Bonjour, SLP, UPnP
• Stan
dard TCP/IP Printing(RAW), LPR,
IPP
• SNMPv 1/2/3, HTTP(S), IPSec
• TCP/IPv6
(DHCP, DNS, RAW, LPR,
SNMPv 1/2/3, HTTP(S), IPSec
(See "IPv6 Configuration" on page 42.)
You need to set up the network protocols on the machine to use it as your
ne
twork machine. You can set up the basic network settings through the
machine's control panel.
The following table shows the network environments supported by the
machine:
INTRODUCING USEFUL NETWORK PROGRAMS
There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.
Before using the programs below, set the IP adress first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
• C
onfigure the network parameters necessary for the machine to connect
to various network environments.
• Customize machine settings.
(See "Using SyncThru™ Web Service" on page 82.)
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and troubleshoot
network machines from any site with corporate internet access. Download
this program from http://solution.samsungprinter.com.
AnyWeb Print
This tool helps you to screen-capture, preview, scrap and print the screen of
Windows Internet Explorer more easily, than when you use the ordinary
program. Click Start > All programs > Samsung Printers > your machine
name > AnyWeb Print to link the website where the tool is available for the
download. This tool is available only for Windows operating systems.
SetIP
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol. (See "IP setting
using SetIP Program (Windows)" on page 38 or "IP setting using SetIP
Program (Macintosh)" on page 38.)
TCP/IPv6 is not supported by this program.
USING A WIRED NETWORK
You must set up the network protocols on your machine to use it on your
network. This chapter will show you how this is easily accomplished.
You can use network after connecting network cable to a corresponding
port on your machine.
Printing Network Configuration report
You can print a Network Configuration Report from the machine’s control
panel that will show the current machine’s network settings. This will help
you to set up a network and troubleshooting problems.
1. Pr
ess Menu on the control panel.
2. Pr
ess the left/right arrow until Network appear and press OK.
3. Pr
ess the left/right arrow until Network Info. appear and press OK.
Using this Netw
ork Configuration Report, you can find your machine MAC
address and IP address.
For example:
• M
AC Address : 00:15:99:41:A2:78
• I
P Address : 192.0.0.192
ITEM REQUIREMENTS
Network interface
Network operating system
Network protocols