User's Manual

Basic setup_ 46
SETTING JOB TIMEOUT
When there is no input for a certain period of time, the machine exits the
current menu and goes in to the default settings. You can set the amount of
time the machine will wait.
1. Press Menu on the control panel.
2. Press the left/right arrow until System Setup appear and press OK.
3. Press the left/right arrow until Machine Setup appear and press OK.
4. Press the left/right arrow until Job Timeout appear and press OK.
5. Enter the time using left/right arrow or numeric keypad.
6. Press OK to save the selection.
7. Press Stop/Clear to return to ready mode.