User's Manual

Media and tray_ 53
8. Press Stop/Clear to return to ready mode.
USING THE OUTPUT SUPPORT
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. The printer sends output to the output tray
by default. To use the output tray, make sure that the rear cover is closed.
Stacking papers firmly
If you use a machine in a humid area, or you are using the damp print media
caused by a high humidity, the print-outs on the output tray may be curled
and may not be stacked properly. In this case, you can set the machine to
use the Paper Stacking function to let print-outs stacked firmly. But, using
this function will make the print speed slow.
1. Pres
s Menu on the control panel.
2. Pres
s the left/right arrow until System Setup appear and press OK.
3. Pres
s the left/right arrow until Maintenance appear and press OK.
4. Pres
s the left/right arrow until Paper Stacking appear and press OK.
5. Pres
s the left/right arrow until On appear and press OK.
6. Pres
s Stop/Clear to return to ready mode.