User's Manual

Copying_ 64
printed one by one in the following order:
Clone copying
The machine prints multiple original images on a single page. The number
of images is automatically determined by the original image and the paper
size.
This copy feature is available only when you place originals on the scanner
gl
ass.
1. Press (Copy) on the control panel.
2. Press Menu on the control panel.
3. Pres
s the left/right arrow until Copy Feature appear and press OK.
4. Pres
s the left/right arrow until Layout appear and press OK.
5. Pres
s the left/right arrow until Clone Copy appear and press OK.
6. Whe
n Yes appears, press OK.
7. Pres
s Start on the control panel to begin copying.
You cannot adjust the copy size using the Reduce/Enlarge for the
Clone Copy feature.
DECIDING THE FORM OF COPY OUTPUT
You can set the machine to sort the copy job. For example, if you make 2
copies of a 3 page original, one complete 3 page document will print follwed
by a second complete document.
1. Pres
s
(Copy) on the control panel.
2. Place originals, face up, in the document feeder. Or you can use the
scanner glass with a single original document face down and closed the
scanner lid.
3. Pres
s OK and enter the number of copies using the left/right arrow or
numeric keypad.
4. Pres
s Menu on the control panel.
5. Pres
s the left/right arrow until Copy Setup appear and press OK.
6. Pres
s the left/right arrow until Change Default appear and press OK.
7. Pres
s the left/right arrow until Copy Collation appear and press OK.
8. Pres
s the left/right arrow until On appear and press OK.
• On: Prints output in sets to match the sequence of originals.
• Off: Prints output sorted into stacks of individual pages.
9. Press Stop/Clear to return to ready mode.
10. Pr
ess Start to begin copying.
One complete document will print followed by the second complete
d
ocument.
SETTING COPY TIMEOUT
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
1. Pr
ess Menu on the control panel.
2. Pr
ess the left/right arrow until System Setup appear and press OK.
3. Pr
ess the left/right arrow until Machine Setup appear and press OK.
4. Pr
ess the left/right arrow until Timeout appear and press OK.
5. Pr
ess the left/right arrow until the time setting you want appears.
Selecting Of
f means that the machine does not restore the default
settings until you press Start to begin copying, or Stop/Clear to cancel.
6. Press OK to save the selection.
7. Pr
ess Stop/Clear to return to ready mode.