User's Manual

Management tools_ 84
It is especially for the network administrator to set several network IPs at the
same time.
You can only use the SetIP program when your machine is connected
to a network.
Windows
The following procedure is based on the Windows XP operating system.
Installing the program
1. Insert the software CD provided with your machine. When the
software CD runs automatically, close the window.
2. From the Start menu select My Computer and open the X drive. ( X
represents your CD-ROM drive.)
3. Double click Application > SetIP.
4. Double-click Setup.exe to install this program.
5. Click OK.
If necessary, select a language from the drop-down list.
6. Follow the instructions in the window to complete the installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Press the left/right arrow until Network appear and press OK.
3. Press the left/right arrow until Network Info. appear and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
3. Click to open the TCP/IP configuration window.
4. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
5. The machine prints the network information. Confirm all the settings
are correct.
6. Close the SetIP program.
Macintosh
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Press the left/right arrow until Network appear and press OK.
3. Press the left/right arrow until Network Info. appear and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
If you want to change your network printer IP setting, follow the below
instruction.
If you select Typical installation for a network printer during the
printer driver installation, the SetIP program automatically runs
after the installation. Go to step 4.
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. Open the Library folder > Printers > Samsung > your printer
model name > SetIP.
3. Double click the SetIPApplet.html file.
4. The certificate window appears, click Trust.
5. Click to open the TCP/IP configuration window.
6. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
7. The machine prints the network information. Confirm all the settings
are correct.
8. Close the SetIP program.
Linux
SetIP program should be automatically installed during the printer driver
installation.
Printing out the machine’s MAC address
1. Press Menu on the control panel.
2. Press the left/right arrow until Network appear and press OK.
3. Press the left/right arrow until Network Info. appear and press OK.
You can find your machine’s MAC address and IP address.
Setting network values
1. Print the machine’s network configuration report to find your
machine’s MAC address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double click the SetIPApplet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the network card’s MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all the settings
are correct.
7. Close the SetIP program.
USING THE LINUX UNIFIED DRIVER
CONFIGURATOR
The supplied software CD provides you with the Linux Unified Driver
package for using your machine with a Linux computer.
Unified Driver Configurator is a tool primarily intended for configuring
machine devices. Since a machine device combines the printer and
scanner, the Linux Unified Driver Configurator provides options logically
grouped for printer and scanner functions. There is also a special machine
port option responsible for the regulation of access to a machine printer and
scanner via a single I/O channel.GAlso, you can monitor a number of
machine devices via fast ECP parallel ports and USB simultaneously.
After the driver is installed on your Linux system, the Linux Unified Driver
Configurator icon will automatically be created on your desktopU
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.