User's Manual

Troubleshooting_ 107
2. Remove the jammed paper by gently pulling it straight out.
3. Replace the toner cartridge and close the front door. Printing
automatically resumes.
In exit area
Click this link to open an animation about clearing a jam.
1. Ope
n and close the front door. The jammed paper is automatically
ejected from the machine.
If you do not see the jammed paper, go to next step.
2. Gen
tly pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance when
you pull, stop and go to the next step.
3. Ope
n the rear door.
4. Pull the pressure
levers down and remove the paper.
If you do not see the jammed paper, go to next step.
5. Pu
ll the fuser cover levers down and remove the paper.
Return the fuser cover levers to their original position.
The fuser area is hot. Take care when removing paper from the
machine.
6. Return the pressure levers to their original position.
7. C
lose the rear door.
8. Ope
n and close front door, printing automatically resumes.
1 Pressure lever