User's Manual

Supplies and accessories_ 121
1. Open the front door.
2. Pull the toner cartridge
out.
3. Take a new toner cartridge out of its package.
4. Remove the pap
er protecting the toner cartridge by pulling the packing
tape.
5. Locate the sealing tape at the end of the toner cartridge. Carefully pull
the tape completely out of the cartridge and discard it.
• The sealing tape should be longer than 60 cm (23.6 inches)
when correctly removed.
• Hol
ding the toner cartridge, pull the sealing tape straight to
remove it from the cartridge. Be careful not to cut the tape. If
this happens, you cannot use the toner cartridge.
• Refer
to the helpful pictures on the cartridge wrapping paper.
6. Slowl
y shake the cartridge five or six times to distribute the toner evenly
inside the cartridge. It will assure maximum copies per cartridge.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Do not touch the green underside of the toner cartridge. Use the
handle on the cartridge to avoid touching this area.
7. H
old the toner cartridge by the handle and slowly insert the cartridge into
the opening in the machine.
Tabs on the sides of the cartridge an
d corresponding grooves within the
machine will guide the cartridge into the correct position until it locks into
place completely.
8. Close the front door. Make sure that the cover is securely closed.