User's Manual

Wireless network setup_ 48
name, set the machine to be shared on the network, set the machine
as the default machine, and change the port name of each machine.
Click Next.
14. After the install
ation is finished, a window asking you to print a test
page appears. If you want to print a test page, click Print a test
page. Otherwise, just click Next and skip to step 16.
15. If
the test page prints out correctly, click Yes.
If not, click No t
o reprint it.
16. To
register as a user of the machine in order to receive information
from Samsung, click On-line Registration.
17. Cli
ck Finish.
Installing the machine on an Ad-Hoc wireless
network (Windows)
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an Ad-Hoc wireless network by
following the simple steps below.
Items to prepare
Ensure you have next items ready.
• Wi
reless network computer
• Softw
are CD provided with your machine
• Wi
reless network machine
• USB c
able
Creating the Ad-Hoc network in Windows
When the items are ready, follow below steps:
1. Che
ck whether the USB cable is connected to the machine.
2. Tu
rn on your computer and the wireless network machine.
3. Insert
the supplied software CD into your CD-ROM drive.
• T
he software CD should automatically run and an installation
window appear.
• If the instal
lation window does not appear, click Start and then
Run. Type X:\Setup.exe, replacing “X” with the letter which
represents your drive. Click OK.
• If you
use Windows Vista, Windows 7 or Windows Server 2008
R2 click Start > All programs > Accessories > Run.
Type X:\Setup.exe rep
lacing “X” with the letter which represents
your drive and click OK.
• If
the AutoPlay window appears in Windows Vista, Windows 7 or
Windows Server 2008 R2, click Run Setup.exe in Install or run
program field, and click Continue or Yes in the User Account
Control windows.
4. Select the W
ireless Setting and Installation option.
• Install Now: First you must configure the wireless network
settings of your printer to print through wireless.
• W
ireless Setting and Installation: Configure the wireless
network settings of your printer with a USB cable then install the
printer driver. Press this button to set up the wireless connection
if you have not set up the wireless connection before.
5. Read
the License Agreement, and select I accept the terms of the
License Agreement. Then, click Next.
6. The software
searches the wireless network.
If the software has failed to search the network, check if the
USB cable is connected properly between the computer and
machine, and follow the instruction on the window.
7. After searchin
g the wireless network,Ga list of wireless network your
machine has searched appears.
If you want to use the Samsung default ad-hoc setting, select the last
wireless network on the list, which Network Name(SSID) is
airportthru and Signal is Printer Self Network.
Then, click Ne
xt.
If you want to use other ad-hoc settings, select other wireless
network fro
m the list.
If you want to change ad-hoc settings click the Advanced
Setting buttonU
• Enter the wireless Network Name: Type in the SSID
name you want (SSID is case-sensitive).
• Op
eration Mode: Select Ad-hoc.
• Channel: Select the channel. (Auto Setting
or 2412 MHz
to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption
may
or may not be used, depending on the need for data
security.
Shared Key: Authentication is used. A device that has a
prop
er WEP keyGcan access the network.
• Encryption: Select the encryption. (None, WEP64,
WEP128)
• Networ
k Key: Enter the encryption network key value.
• Confirm Network
Key: Confirm the encryption network
key value.
• WEP Key Index: If you are using the WEP Encryption,
sele
ct the appropriate WEP Key Index.