User's Manual

M AINTENANCE
8.11
8
Cleaning the Drum
If there are streaks or spots on your print, the OPC drum of the
cartridge may require cleaning.
1 Before starting the cleaning procedure, make sure that
paper is loaded in the machine.
2 Press Menu on the control panel until “Maintenance”
appears on the top line of the display.
The first available menu item, “Clean Drum,” displays on
the bottom line.
3 Press Enter .
4 When the display asks you to confirm your selection, press
Enter .
The machine prints out a cleaning page. Toner particles on
the drum surface are affixed to the paper.
5 If the problem remains, repeat steps 1 through 4.
Printing When Toner is Low
When the toner cartridge is nearly empty, your machine saves
incoming faxes in memory without printing them. If you want to
print a fax when toner is low, you can set your machine to
continue printing even though print quality is not as good.
1 Press Menu until “Machine Setup” appears on the display.
2 Press the scroll button ( or ) until “Ignore Toner” appears
on the bottom line and press
Enter .
3 Press the Scroll button ( or ) to select “On” or “Off”.
Select “On” to continue printing incoming faxes in low
toner status.
Select “Off” to stop printing when the toner cartridge is
nearly empty. This is the default setting.
4 Press Enter to save the selection.