User's Manual

2. Menu overview and basic setup

Basic scanning



Scanning using the contorl panel

This is the normal and usual procedure for scanning originals.

• Accessing menus may differ from model to model.

• It may be necessary to press OK to navigate to lower-level

menus for some models.

For USB connected machine

This is a basic scanning method for USB-connected machine.

Place a single document face down on the document glass, or

load the documents face up into the document feeder (see

"Loading originals" on page 48 ).

Select (scan) > Scan to PC > Local PC on the control panel.

If you see Not Available message, check the port

connectionSGor select Enable Scan from Device Panel in

5COUWPI'CU[2TKPVGT/CPCIGT!Switch to advanced

mode.!Scan to 2% Settings.

Select the application program you want and press OK.

Default setting is My Documents.

You can add or delete the folder where the scanned file is

saved in 5COUWPI'CU[2TKPVGT/CPCIGT!Switch to

advanced mode.!Scan to 2% Settings.

Select the option you want and press OK.

• Scan Format appears only when you selected the Scan

destination to My Documents.

• If you want to scan from the default setting, press Start.

Scanning begins.

• Scanned image is saved in computer’s My Documents

folder.

• You can use Twain driver to scan quickly in Scan Assistant

program (see Advanced Guide).