User's Manual

Basic faxing

2. Menu overview and basic setup

Enter the receiving fax machine’s number.

Press Start on the control panel. The machine starts to scan

and send a fax to destinations.

• If you want to send fax directly from your computer, use

Samsung Network PC Fax (see Advanced Guide).

• When you want to cancel a fax job, press (Stop/Clear)

before the machine start transmission.

• If you used the scanner glass, the machine shows the

message asking to place another page.

Sending a fax manually

This method is sending a fax using On Hook Dial on the control

panel. If your machine is SCX-4833HD or SCX-5637HR, you can send

a fax using the handset.

Place a single document face down on the document glass, or

load the documents face up into the document feeder (see

"Loading originals" on page 48 ).

Select (fax) on the control panel.

Adjust the resolution and the darkness to suit your fax needs

(see "Adjusting the document settings" on page 66).

Press On Hook Dial on the control panel or lift the handset.

Enter a fax number using the number keypad on the control

panel.

Press Start on the control panel when you hear a high-pitched

fax signal from the remote fax machine.

Sending a fax to multiple destinations

You can use the Multiple Send feature, which allows you to send a fax

to multiple locations. Originals are automatically stored in memory

and sent to a remote station. After transmission, the originals are

automatically erased from memory.