User's Manual

Basic copying
58
2. Menu overview and basic setup
Darkness
If you have an original containing faint marking and dark images,
you can adjust the brightness to make a copy that is easier to read.
1
Select (copy) > (Menu) > Copy Feature > Darkness
on the control panel.
2
Select the option you want and press OK.
For example, the Light+5 being the lightest, and the Dark+5
being the darkest.
3
Press (Stop/Clear) to return to ready mode.
Contrast
Set this parameter to adjust the contrast between light and dark.
1
Select (copy) > (Menu) > Copy Feature > Contrast on
the control panel.
2
Select the option you want and press OK.
For example, the Light+5 being the lightest, and the Dark+5
being the darkest.
3
Press (Stop/Clear) to return to ready mode.
Original Type
The original type setting is used to improve the copy quality by
selecting the document type for the current copy job.
1
Select (copy) > (Menu) > Copy Feature > Original
Type on the control panel.
2
Select the option you want and press OK.
• Text: Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and
photographs.
If texts in the printout is blurry, select Text to get the clear
texts.
• Photo: Use when the originals are photographs.
3
Press (Stop/Clear) to return to ready mode.