User's Manual

Basic printing

2. Menu overview and basic setup



Eco printing

The Eco function cuts toner consumption and paper usage. You can

configure Eco function to adjust your paper savings and save the

setting you want to use.

If you press the Eco button from the control panel, eco mode is

enabled.

Setting eco mode on the control panel

• The settings set from the machine’s driver override the

settings on the control panel.

• Accessing menus may differ from model to model (see

"Accessing the menu" on page 29).

• It may be necessary to press OK to navigate to lower-level

menus for some models.

Select (Menu) > System Setup > Machine Setup > Eco

Settings on the control panel.

Select the option you want and press OK.

• Default Mode: Select this to turn on or off the eco mode.

(Duplex (long edge)/Toner save/2-up/Skip blank pages)

- Off: Set the eco mode off.

- On: Set the eco mode on.

If you set the eco mode on with a password from the

SyncThru™ Web Service ( Settings tab > Machine Settings >

System > Eco > Settings), the On force message appears.

You have to enter the password to change the eco mode

status.

• Change Template: Follow the settings from Syncthru™

Web Service. Before you select this item, you must set the

eco function in SyncThru™ Web Service> Settings tab >

Machine Settings > System > Eco > Settings.

Press OK to save the selection.