User's Manual

Media and tray

2. Menu overview and basic setup

Envelope

Printing successfully on envelopes depends upon the quality of the

envelopes.

To print an envelope, place it as shown in the following figure.

If envelopes are printed out with wrinkles, crease, or black bold lines,

open the rear cover and pull down the pressure lever on the right

side about 90 degrees and try printing again. Keep the rear cover

opened during printing.

• When selecting envelopes, consider the following factors:

- Weight: should not exceed 90 g/m

otherwise; jams may

occur.

- Construction: should lie flat with less than 6 mm curl and

should not contain air.

- Condition: should not be wrinkled, nicked, nor damaged.

- Temperature: should resist the heat and pressure of the

machine during operation.

• Use only well-constructed envelopes with sharp and well-

creased folds.

• Do not use stamped envelopes.

• Do not use envelopes with clasps, snaps, windows, coated lining,

self-adhesive seals, or other synthetic materials.

• Do not use damaged or poorly made envelopes.

1 Pressure lever