User's Manual

4.3
E-mail Fax
Notes:
• When entering text, press 0 to enter symbols or special character sets
for e-mail address. The available characters are @, .com, ., /, .co.kr,
.net, .org, .org.kr, +, -, ,, ‘, , #, &, 0.
• If you does not enter the parameter for any item and press Start/Enter,
your machine sounds a error beep and prompts to enter.
• If you enter Stop while entering, the display confirms your selection.
Press Start/Enter to stop entering, and the information you have
entered will be erased. Press Stop to return to the item where you
were previously and continue registering.
7. When you have finished entering the parameter for the last setup item
and press Start/Enter, the display automatically goes to Standby
mode.
Configuring Manual Setup Information
1. Press E-mail on the front panel and hold down for about 2 seconds.
The display shows the first menu; SETUP E-MAIL.
2. Press Start/Enter to access the Setup E-mail menu.
3. Press ➛or ❿ until you find ‘MANUAL SETUP’ and press Start/Enter.
The display asks you to select the memory cell for your e-mail
information showing the first available cell number.
4. Enter the number of the desired memory cell.
5. The display shows the first setup item, ‘PROVIDER NAME.’ briefly, then
prompts you to enter the parameters. Enter the parameters and press
Start/Enter. The display automatically goes to next item.
• PROVIDER NAME: Enter the name of your ISP.
• DIAL UP NO.: Enter the dial-up number of the ISP.
• ISP USER ID: Enter the login ID for connecting to the ISP.
• ISP PASSWORD: Enter the login password for connecting to the
ISP.
• POP3 SERVER: Enter the domain name of the POP3 server.
• POP3 USER NAME: Enter the login name of the SMTP server.
• POP3 PASSWORD: Enter the login password of the POP3 server.
INPUT NO[1-10]2