User's Manual

4.4
E-mail Fax
• SMTP SERVER: Enter the domain name of the SMTP server.
• YOUR NAME: Enter your name.
• MAIL ADDRESS: Enter your e-mail address.
Notes:
• When entering text, press 0 to enter symbols or special character sets
for e-mail address. The available characters are @, .com, ., /, .co.kr,
.net, .org, .org.kr, +, -, ,, ‘, , #, &, 0.
• If you does not enter the parameter for any item and press Start/Enter,
your machine sounds a error beep and prompts to enter.
• If you enter Stop while entering, the display confirms your selection.
Press Start/Enter to stop entering, and the information you have
entered will be erased. Press Stop to return to the item where you
were previously and continue registering.
6. When you have finished entering the parameter for the last setup item
and press Start/Enter, the display automatically returns to Standby
mode.
Editing E-mail Information
1. Press E-mail on the front panel and hold down for about 2 seconds.
The display shows the first menu; SETUP E-MAIL.
2. Press Start/Enter to access the Setup E-mail menu.
The display shows ‘AUTO SETUP.’
3. Press ➛or ❿ until you find ‘MANUAL SETUP’ and press Start/Enter.
4. Enter the number of the desired memory cell where the information
you want to edit is registered.
5. The display shows the registered information. Change the parameters
in the same way as configuring.
Press ➛ or ❿ to move the cursor to the character you want to delete
and press Search/Delete to delete it. Then, enter the correct
character.
6. When you have finished entering the parameter for the last setup item
and press Start/Enter, the display automatically returns to Standby
mode.