User's Manual

4.11
E-mail Fax
Sending an E-mail Fax
1. Load your document face down with the top edge first going into the
document feeder. And adjust Resolution and Contrast, if necessary.
For details, see page 3.8.
2. Press E-Mail on the front panel. The display shows ‘E-MAIL SEND’
briefly.
3. If you did not set the default ISP, the display shows the available
information.
Press ➛ or ❿ until your name appears and press Start/Enter.
If you have set the default ISP, it is automatically selected and you
cannot see the display above. Just go to step 4.
Note: If the multiple users are using the SF-535e, do not set the default
ISP, or the default ISP must be changed each time the other
users send or receive an e-mail fax.
4. Enter the subject of your e-mail and press Start/Enter.
5. Enter the recipient’s e-mail address and press Start/Enter.
You can press appropriate one-touch button, or press Search/Delete
and ➛ or ❿ to scroll through the e-mail address book.
6. If you want to add more addresses, repeat step 5.
Or, if you want to begin transmission immediately, press Start/Enter.
E01:HANSEM