User's Manual

73
Messages
72
Messages
Default Type: allows you to set the default
message type (Text, Fax, Email and Paging). The
network can convert the messages into the
selected format.
Default V
alidit y: allows you to set the length of
time for which your text messages will be stored
at the message centre while attempts are made
to deliver them.
Setting Name
: allows you to give a name to the
setting group currently being defined.
Common Setting: four options are available.
R
eply Path: allows the recipient of your SMS
message to send you a reply message via your
message centre, if the service is provided by the
network.
Deliv
ery Reports
: allows you to activate or
deactivate the report function. When this
function is activated, the network informs you
whether your message has been delivered or
not.
Bearer Selection
: allows you to choose between
GSM and GPRS.
W
ap Push: allows you to select whether you
receive Web messages from the server or not.
Select Never if you do not want to receive any
messages, Always to receive all messages, and
SMS-C Specific to receive messages from a
specific SMS centre.
Broadcast (Menu 1.5)
This network service allows you to receive text
messages on various topics, such as the weather
or traffic. Messages are displayed immediately
they are received, provided that:
¥ The phone is in idle mode
¥ The Receive option is set to Enable
¥ The message channel is currently active in the
channel list
The following options are available:
Read: lets y ou view the message. Volatile
displays the messages from the network, but
loses its contents as soon as the phone is
switched off. Scroll through the message by
using the and keys. While reading a message,
press the S a v e soft key to store the message in
the Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the
channels from which you wish to receive
broadcast messages. The following options are
available:
Select
: used to enable or disable channels in the
list b y marking or unmarking them respectively
(a check mark is displayed in front of each
channel selected).
Add Channel
: used to declare the ID and title for
a new channel.
Delete
: used to remove a channel from the list.
Edit
: used to change the ID and title of an
existing channel.