User's Manual

79
78
Call Records
Call Cost (Menu 2.5)
This network feature lets you view the cost of
calls.
The following options are available:
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost
exceeds the maximum cost set via the Set Max
Cost option, you can no longer make any calls
until y ou reset the counter.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 119) and then press the O K soft k e y.
Set Max Cost: option used to enter the
maximum cost that you authorise for your calls.
Price/Unit: option used to set the cost of one
unit; this price per unit is applied when
calculating the cost of your calls.
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
¥ Ring melody, volume and type
¥ Sounds made when you press a key, make an
error or receive a message
Note: When the phone is in the silent mode (see
page 28), you cannot change the sound
settings.
Ring Tone (Menu 3.1)
This option allows you to select the required ring
melody.
You can choose between many different
melodies. Each time you select a melody, it is
played for a few seconds. If you have
downloaded any sounds from the Internet or
EasyGPRS programme or received any ring tone
messages, you can view the list in this menu.
Ring Volume (Menu 3.2)
This option allows you to adjust the ring volume
to one of five levels.
Use the and keys or the and keys
on the left side of the phone.