User's Manual

119
Access Codes
118
Access Codes
PIN
The P ersonal Identification N umber or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be
used until you re-enable it by entering the PUK
(see below).
To... Refer to...
Activate/deactivate Page 79
the PIN Check feature (Menu 4.6.1).
Change the PIN Page 80
(Menu 4.6.2).
PUK
The 8-digit PUK (P IN U nblocking K ey) is
required to change a disabled PIN. The PUK may
be supplied with the SIM card. If not, or you
h ave lost it, contact your service provider.
To re-enable your PIN:
1. Key in the PUK and press the O K soft k ey.
2. Enter a new PIN of your choice and press the
O K soft key.
3. When the Confirm New PIN message is
displayed, key in the same code again and
press the O K soft ke y.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid.
Contact your service provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 81 (Menu
4.6.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Key in the PUK2 and press the O K soft k e y.
2. Enter a new PIN2 of your choice and press
the O K soft k e y.
3. When the Confirm PIN2 message is
displayed, key in the same code again and
press the O K soft ke y.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.