User's Manual

Call Records
88
Delete All (Menu 3.4)
This menu allows you to delete all of the records in
each call type. You can also delete all of your call
records at one time.
When a confirming message displays, press the Yes
soft key to confirm.
Call Time (Menu 3.5)
This menu lets you view the timers for calls made
and received.
Note : The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following timers are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
To Press the
select a call type to
clear
or key. To delete all
of your call records, select
All Calls.
place a check mark Mark soft key.
remove a check mark Unmark soft key.
delete the marked
messages
Delete soft key.
Call Records
89
Total Received: total length of all calls received
since the timer was last reset.
Reset Timers: option used to reset the call timers.
You must first enter the phone password (see
page 137) and then press the OK soft key.
Call Cost (Menu 3.6)
This network feature lets you view the cost of calls.
This menu may not be shown depending on your
SIM card.
The following options are available:
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set Max Cost option,
you can no longer make any calls until you reset the
counter.
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 139) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 139) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 139) and then press the OK soft key.