User's Manual

90
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note : When the phone is in Silent Mode (see
page 30), you cannot change the sound
settings.
Ring Tone (Menu 4.1)
This menu allows you to select a ring melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded sounds from the
Internet or EasyGPRS programme, you can use
them in this menu.
Ring Volume (Menu 4.2)
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the volume keys on
the left side of the phone to increase or decrease
the volume.
Sound Settings
91
Alert Type (Menu 4.3)
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu (Menu 4.1); see
page 90.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone (Menu 4.4)
This menu allows you to select a tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
Message Tone (Menu 4.5)
This menu allows you to select how the phone
informs you that a new message has been received.
SMS Tone (Menu 4.5.1)
This menu allows you to select how the phone
informs you that a new SMS message has been
received.