User's Manual

Samsung Semiconductor, Inc. ARTIK 530 Development Board User Guide

Samsung Confidential

Specifications in this document are tentative and subject to

change.

Figure 23. USB Serial Cable hooked up to the Platform Board

TERMINAL EMULATOR INSTALLATION

Setting up a connection with the ARTIK 530 Module can be done in a variety of ways. Here we choose to install PuTTY a free

serial console. The software can be downloaded from http://www.putty.org/. Once downloaded go through the following

steps:

1. Open the device manager on the control panel.

2. Check the COM port number on your PC when you connect the USB serial cable. In our case the COM port allocated

is COM13.

3. Set the PuTTY configuration as follows:

a. Set the “Serial line” as the COM port number found in step 2.

b. Set the COM speed to "115200".

c. Set the connection type to "Serial".

d. Save the session under ARTIK-Pro.

4. Select your saved session and click the “Open” button.